Installing Scansnap; Before Installing Scansnap - Fujitsu ScanSnap fi-5110EOXM Operator's Manual

2.1

Installing ScanSnap

"Installation" is the operation of copying the program files supplied with ScanSnap to the hard disk
of your computer, and creating the environment for using ScanSnap on the computer installed with
the ScanSnap program files.

■ Before Installing ScanSnap

1. Before installing ScanSnap, please perform the following preparation.
■ Operating system
The following OS is required:
•
Mac OS X v10.2, v10.3, v10.4
ScanSnap Manager
Adobe Acrobat 7.0
* For Mac OS X v.10.2.8
■ Computer
•
Power PC® G4 Processor 800MHz or higher (recommended: Power PC® G5
Processor 1.6GHz or higher)
•
USB port (USB 2.0/1.1)
■ RAM
•
128MB or more (recommended: 512MB or more)
ATTENTION
v
■ Free disk space
•
ScanSnap Manager
•
Adobe Acrobat 7.0
6
Mac OS X
v10.1
X
X
•
ScanSnap may not function if it is connected to the USB ports for the keyboard
or monitor.
•
If you are using a commercially available USB hub, use the type equipped with
an AC adapter.
•
If you connect the scanner using USB 2.0, it is required that the USB port and
the Hub are compliant with USB 2.0. The scanning speed may slow down
when you connect the scanner using USB 1.1. If there is a USB 2.0 port on
your computer, please use it.
•
If the CPU and the memory do not meet the required specifications, the
scanning speed will be slow.
Mac OS X Mac OS X
v10.2 v10.3
*
10 Mbytes
450 Mbytes
Mac OS X
v10.4
X