Accessing The Camera Using The Web Browser - Sony SNC-EP520 User Manual

Accessing the Camera
Using the Web Browser
After the IP address has been assigned to the camera,
check that you can actually access the camera using the
Web browser installed on your computer.
Use Internet Explorer as a Web browser.
1
Start the Web browser on the computer and type the
IP address of the camera in the URL address bar.
The viewer window is displayed.
Display sample
Note
When accessing the camera, images will not be
displayed in the following conditions.
• When the maximum number of viewers exceeds 5
However, if the e-Mail (SMTP) function or the FTP
client function is set to On, the maximum number of
viewers will be 3.
• The bit rate including new requests exceeds 16Mbps
• Depending on the setup environment, video may
become unclear even when being viewed by less than
the maximum number of viewers. If this occurs,
reduce the number of viewers, lower the bit rate, or
decrease the size of the picture (SNC-ZP550/ZR550).
Using the SSL function
Note
The model on sale in China does not support the SSL
function.
When Internet Explorer is used
When you enter the camera IP address, "Certificate
Error" may appear according to the status of the
certificate set on the camera. In this case, click
Continue to this website (not recommended). to
continue.
8

Accessing the Camera Using the Web Browser

The welcome page appears (in SSL communication).
When "Allow HTTP connection for some
clients" (page 48) is checked
To use HTTP and SSL connections separately to access,
enter the following in the address box of the browser.
For HTTP connection
For SSL connection
When the viewer of the camera is
displayed for the first time
"Security Warning" is displayed. When you click Yes,
ActiveX control is installed and the viewer is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
• When you install ActiveX Control, you should be
logged in to the computer as Administrator.