Removing A 3.5-Inch Device - HP ProDesk 600 Hardware Reference Manual
Hardware reference guide
Hide thumbs
Also See for ProDesk 600:
- Maintenance and service manual (245 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Removing a 3.5-inch device
CAUTION:
computer.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
5.
If the computer is on a stand, remove the computer from the stand.
6.
Remove the access panel and front bezel.
7.
Rotate the drive cage to its upright position.
ENWW
All removable media should be taken out of a drive before removing the drive from the
Regardless of the power-on state, voltage is always present on the system board
Installing and removing drives
71
Hide quick links:
Advertisement
Table of Contents
