Using The Smart Cover Failsafe Key To Remove The Smart Cover Lock - HP ProDesk 600 Hardware Reference Manual
Hardware reference guide
Hide thumbs
Also See for ProDesk 600:
- Maintenance and service manual (245 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Using the Smart Cover FailSafe Key to remove the Smart
Cover Lock
To open the access panel with the Smart Cover Lock engaged:
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
5.
Use the Smart Cover FailSafe Key to remove the tamper-proof screw(s) that secure the Smart
Cover Lock to the chassis.
●
Removing the Smart Cover Lock Screws from the Tower
98
Appendix B Unlocking the Smart Cover Lock
Regardless of the power-on state, voltage is always present on the system board
ENWW
Hide quick links:
Advertisement
Table of Contents
