HP ProDesk 600 Hardware Reference Manual page 38
Hardware reference guide
Hide thumbs
Also See for ProDesk 600:
- Maintenance and service manual (245 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
7.
If you are installing an optical drive, install four M3 metric guide screws (not provided) in the
lower holes on each side of the drive.
NOTE:
drive to the new one.
CAUTION:
internal components of the drive.
8.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place.
30
Chapter 2 Tower (TWR) hardware upgrades
When replacing an optical drive, transfer the four M3 metric guide screws from the old
Use only 5-mm long screws as guide screws. Longer screws can damage the
ENWW
Hide quick links:
Advertisement
Table of Contents
