HP ProDesk 600 Hardware Reference Manual page 39
Hardware reference guide
Hide thumbs
Also See for ProDesk 600:
- Maintenance and service manual (245 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
9.
Connect the power cable (1) and data cable (2) to the rear of the optical drive.
10.
Connect the opposite end of the data cable to one of the light blue SATA connectors on the
system board.
NOTE:
drive connectors.
11.
Replace the front bezel.
NOTE:
from HP. Install the bezel trim piece in the front bezel before replacing the front bezel.
12.
Replace the computer access panel.
13.
Reconnect the power cord and any external devices, then turn on the computer.
14.
Lock any security devices that were disengaged when the access panel was removed.
ENWW
Refer to
System board connections on page 17
An optional bezel trim piece that surrounds the front of the 5.25-inch drive is available
for an illustration of the system board
Installing and removing drives
31
Hide quick links:
Advertisement
Table of Contents
