Getting Started; Installing The Mfp Driver; System Requirements - Dell 1815dn Multifunction Mono Laser Printer User Manual

Linux

Getting Started

Installing the MFP Driver

Using the MFP Configurator
Configuring Printer Properties
Printing a Document
Scanning a Document
Getting Started
The supplied Drivers and Utilities CD provides you with Dell's MFP driver package for using your printer with a Linux computer.
Dell's MFP driver package contains printer and scanner drivers, providing the ability to print documents and scan images. The package also delivers powerful
applications for configuring your printer and further processing of the scanned documents.
After the driver is installed on your Linux system, the driver package enables you to monitor a number of MFP devices via USB port. The acquired documents
can then be edited, printed on the same local MFP or network printers, sent by e-mail, uploaded to an FTP site, or transferred to an external OCR system.
The MFP driver package is supplied with a smart and flexible installation program. You do not need to search for additional components that might be
necessary for the MFP software: all required packages will be carried onto your system and installed automatically; this is possible on a wide set of the most
popular Linux clones.
Installing the MFP Driver

System Requirements

Supported OS
Redhat 8, 9
l
Mandrake 9, 10
l
SuSE 8.2, 9.1
l
Fedora Core 1, 2, 3
l
Recommended Hardware Requirements
Pentium IV 1 GHz or higher
l
RAM 256 MB or higher
l
HDD 1 GB or higher
l
NOTE: It is also necessary to claim swap partition of 300 MB or larger for working with large scanned images.
NOTE: The Linux scanner driver supports the optical resolution at maximum.
Software
Linux Kernel 2.4 or higher
l