Configure Radius Nas For An Aruba Controller - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Amigopod and ArubaOS Integration Application Note
A useful diagnostic tool to verify that Amigopod has Internet connectivity via HTTP is available under
Administrator > Network Setup > Network Diagnostics shown in Figure 21.
Figure 21 Amigopod diagnostics

Configure RADIUS NAS for an Aruba Controller

For the Aruba controller to authenticate users, it must be able to communicate with the Amigopod
RADIUS instance. In first step of the Aruba controller configuration, a RADIUS server definition was
defined. This step configures the opposing Amigopod NAS definition for the Aruba controller as seen
in Figure 22. For the RADIUS transactions to be successful, the RADIUS key used in the first Aruba
controller configuration step must be entered exactly the same here.
To add a new RADIUS NAS entry, browse to RADIUS > Network Access Servers and click Create.
Figure 22 RADIUS NAS servers
Aruba Networks, Inc. Amigopod Configuration | 30