Amigopod Configuration - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual
Xirrus array integration guide
Hide thumbs
Also See for PowerConnect W Clearpass 100 Software:
- Deployment manual (128 pages) ,
- Integration manual (52 pages) ,
- Release note (38 pages)
Table of Contents
Advertisement
Amigopod Configuration
The following configuration procedure assumes that the amigopod software or appliance has
been powered up and a basic IP configuration has been applied through the setup wizard to
allow the administrator to access the Web User Interface. The following table reviews the IP
Addressing used in the test environment but this would be replaced with the site specific details
of each customer deployment:
Xirrus Array Address
Internet Gateway Address
amigopod IP Address
amigopod RADIUS port
Please refer to the amigopod Quick Start Guide for more information on the basic configuration
of the amigopod software.
CONFIDENTIAL
192.168.1.104
192.168.1.1
192.168.1.103
Auth 1812 Acc 1813 (default settings)
10
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?