Table of Contents
Advertisement
Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
The server can be turned off in any of the following ways:
v You can turn off the server from the operating system, if your operating system
v You can press the power-control button to start an orderly shutdown of the
v If the operating system stops functioning, you can press and hold the
v If the Wake on LAN feature turned on the server, the Wake on LAN feature can
v The IMM can turn off the server as an automatic response to a critical system
v You can turn off the server through a request from the IMM.
IBM MAX5 for System x memory expansion module
If you purchased an optional IBM MAX5 for System x (MAX5) memory expansion
module, it supports up to 32 DDR3 DIMMs, two 675-watt power supplies, and five
40 mm hot-swap speed-controlled fans. It provides added memory and multi-node
scaling support for host servers. The MAX5 expansion module is based on eX5, the
next generation of Enterprise X-Architecture. The MAX5 expansion module is
designed for performance, expandability, and scalability; the fans and power
supplies use hot-swap technology for easy replacement without requiring that the
expansion module be turned off.
If you are adding an optional MAX5 or scaling to another server, see the rack
installation instructions that comes with the cable option kit.
The following illustration shows the MAX5 memory expansion module. The
illustrations in this document might differ slightly from your hardware.
18
IBM System x3850 X5 and x3950 X5 Types 7145 and 7146: Installation and User's Guide
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
operating system and turn off the server, if your operating system supports this
feature.
power-control button for more than 4 seconds to turn off the server.
turn off the server.
failure.
Advertisement
Table of Contents
