Table of Contents
Advertisement
Installing the top-cover bracket
To replace the top-cover bracket, complete the following steps:
1. Make sure that all internal cables are correctly routed.
2. Align the top-cover bracket on top of the server so that the metal tabs line up
3. Slide the blue latches on the top cover bracket toward the outside of the server
40
IBM System x3850 X5 and x3950 X5 Types 7145 and 7146: Installation and User's Guide
Latch
correctly on the chassis, and then rotate it into place.
to lock it in place.
Latch
Advertisement
Table of Contents
