Table of Contents
Advertisement
6.3.3.
Creating.a.RAID.10.set.(Stripe.+.Mirror)
To create a RAID 10 set:
1.
From the utility main menu, select 1..Create.RAID.Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
RAID Level:
Strip Size:
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
and cannot contain special characters.
[ ↑↓ ]-Select
2.
Enter a name for the RAID 10 set, then press <Enter>.
3.
Highlight RAID.Level, press the up/down arrow key to select RAID.10.
(RAID0+1), then press <Enter>.
4.
Follow steps 4 to 9 of section 5.3.1.Creating.a.RAID.0.set.(striped) to create
the RAID 10 set.
ASUS RS160-E4/PA4
[
CREATE ARRAY MENU
Name:
Volume1
RAID10(RAID0+1)
Disks:
Select Disks
128KB
Capacity:
0.0
GB
Create Volume
[
DISK/VOLUME INFORMATION
[ESC]-Exit
[ENTER]-Select Menu
]
]
6-35
Advertisement
Table of Contents
