Table of Contents
Advertisement
6.3.4.
Creating.a.RAID.5.set.(Parity)
To create a RAID 5 set:
1.
From the utility main menu, select 1..Create.RAID.Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
[ ↑↓ ]-Select
2.
Enter a name for the RAID 10 set, then press <Enter>.
3.
Highlight.RAID.Level, press the up/down arrow key to select RAID5, then
press <Enter>.
4.
Follow steps 4 to 9 of section 5.3.1.Creating.a.RAID.0.set.(striped) to create
the RAID 5 set.
6-36
[
CREATE ARRAY MENU
Name:
Volume1
RAID Level:
RAID5(Parity)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
GB
Create Volume
[
DISK/VOLUME INFORMATION
and cannot contain special characters.
[ESC]-Exit
]
]
[ENTER]-Select Menu
Chapter 6: RAID configuration
Advertisement
Table of Contents
