Ide Primary Master/Slave; Sata Port 1/2/3/4 - Asus RS160-E4 PA4 User Manual

5.3.5. IDE.Primary.Master/Slave;..
. SATA.Port.1/2/3/4
Main
Type:
Multi-Sector Transfers:
LBA Mode Control:
32-Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help Select Item
↑↓
ESC Exit
→←
Type.[Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of the
appropriate IDE device type. Select [CD-ROM] if you are specifically configuring a
CD-ROM drive. Select [ATAPI Removable] if your device is either a ZIP, LS-120,
or MO drive. Select [User] to manually enter the parameters of the device.
Configuration options: [Auto] [User] [Other ATAPI] [IDE Removable] [CD-ROM]
[ATAPI Removable] [None]
• Except for 32-Bit.I/O item, the following items become user-configurable
when the Type item is not set to [Auto].
• Suggest you to keep the default setting of this item [Auto].
• For items that have no sub-menu, you have to use -/+ for values changing.
Multi-Sector.Transfers.[Disabled]
Enables or disables data multi-sectors transfers. When set to 2~16 Sectors, the
data transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors]
LBA.Mode.Control.[Disabled]
Enables or disables the LBA mode. Setting to Enabled enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled. Configuration options: [Disabled] [Enabled]
32-Bit.I/O.[Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5-16
PhoenixBIOS Setup Utility
IDE Primary Master
[Auto]
[Disabled]
[Disabled]
[Disabled]
[Standard]
[Disabled]
-/+ Change Values
Select Menu Enter Select
Item Specific Help
Auto = Autotyping.
None = Disabling drive.
ATAPI Removable = ATAPI
media (e.g., LS120, USB
Floppy, USB Zip).
CD-ROM = CD-ROM drive.
IDE Removable = IDE
removable media (e.g.,
IDE Zip drive).
Other ATAPI = Other
ATAPI media.
User = You simply the
hard disk drive type.
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Chapter 5: BIOS setup