Table of Contents
Advertisement
6.2.3
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
From the Management.Menu, highlight Configure, then press <Enter>.
1.
2.
Use the arrow keys to select View/Add Configuration, then press <Enter>.
The ARRAY.SELECTION.MENU displays the available drives connected to
3.
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN.A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.
ASUS RS160-E4/PA4
6-15
Advertisement
Table of Contents
