Table of Contents
Advertisement
6.3.3
Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
1.
From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[ ↑↓ ]-Select
2.
Enter a name for the RAID 10 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select
3.
RAID 10 (RAID0+1), then press <Enter>.
Follow steps 4 to 9 of section "6.3.1 Creating a RAID 0 set (striped)" to
4.
create the RAID 10 set.
ASUS TS300-E4
[
CREATE ARRAY MENU
Name:
Volume1
RAID Level:
RAID10(RAID0+1)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
GB
Create Volume
[
DISK/VOLUME INFORMATION
cannot contain special characters.
[ESC]-Exit [ENTER]-Select Menu
]
]
6-35
Advertisement
Table of Contents
