Creating A Raid 10 Set (Stripe + Mirror) - Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual

6.3.3 Creating a RAID 10 set (Stripe + Mirror)

To create a RAID 10 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and cannot
[ ↑↓ ]-Select
2. Enter a name for the RAID 10 set, then press <Enter>.
3. Highlight RAID Level, press the up/down arrow key to select
|RAID 10 (RAID0+1), then press <Enter>.
4. Follow steps 4 to 9 of section "5.3.1 Creating a RAID 0 set (striped)"
to create the RAID 10 set.
ASUS TS500-E4
[ CREATE ARRAY MENU
Name: Volume1
RAID Level: RAID10(RAID0+1)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Create Volume
[ DISK/VOLUME INFORMATION
contain special characters.
[ESC]-Exit
]
]
[ENTER]-Select Menu
6-35