Table of Contents
Advertisement
Using.the.Objects.command
To check data consistency using the Objects command:
1.
From the Management.Menu, select Objects, then select Logical.Drive
from the menu.
2.
Use the arrow keys to select the logical drive you want to check, then press
<Enter>.
3.
Select Check.Consistency from the pop-up menu, then press <Enter>.
When prompted, use the arrow keys to select Yes from the dialog box to
4.
check the drive.
5.
When checking is complete, press any key to continue.
ASUS RS160-E4/PA4
6-
Advertisement
Table of Contents
