Table of Contents
Advertisement
5.3.3
Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
[ ↑↓ ]-Select
2.
Enter a name for the RAID 10 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select RAID 10
3.
(RAID0+1), then press <Enter>.
Follow steps 4 to 9 of section 5.3.1 Creating a RAID 0 set (striped) to create
4.
the RAID 10 set.
5-34
[
CREATE ARRAY MENU
Name:
Volume1
RAID Level:
RAID10(RAID0+1)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
Create Volume
[
DISK/VOLUME INFORMATION
and cannot contain special characters.
[ESC]-Exit
]
GB
]
[ENTER]-Select Menu
Chapter 5: RAID configuration
Advertisement
Table of Contents
