Creating A Raid 10 Set (Stripe + Mirror) - Asus RS120-E4 - 0 MB RAM User Manual

6.3.3. Creating.a.RAID.10.set.(Stripe.+.Mirror)
To create a RAID 10 set:
From the utility main menu, select 1..Create.RAID.Volume, then press
1.
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.1.0.1022 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive
[↑↓]-Select
2. Enter a name for the RAID 10 set, then press <Enter>.
3. Highlight RAID.Level, press the up/down arrow key to select RAID.10.
(RAID0+1), then press <Enter>.
4. Follow steps 4 to 9 of section 6.3.1.Creating.a.RAID.0.set.(striped) to create
the RAID 10 set.
ASUS RS120-E4/PA4
[ CREATE ARRAY MENU
Name: Volume1
RAID Level: RAID10(RAID0+1)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
Create Volume
[ DISK/VOLUME INFORMATION
and cannot contain special characters.
[ESC]-Exit
]
GB
]
[ENTER]-Select Menu
6-35