Enable Wireless On The Projector - Dell 7700 FullHD User Manual

Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:
1
Install the optional wireless dongle. See "Installing the Optional Wireless
Dongle" on page 11.
2
Connect the power cable to the wall outlet and press the power button.
3
Press the Menu button on your projector control panel or remote control.
NOTE:
Use
4 The wireless connection default is Enabled. See "Wireless Settings" on
page 48.
5
Access the INPUT SOURCE menu, select Wireless/USB and then select
Wireless Display on the sub-menu. See "INPUT SOURCE WIRELESS/USB"
on page 38.
56 Using Your Projector
, , and buttons to navigate and to select.