Table of Contents
Advertisement
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up,
select Store and press
4. If you select Store without pressing the Enter button, the system will
keep the original settings.
R
—
Press
ESET
W
S
IRELESS
ETTINGS
wireless settings menu provides the following options:
W
—
IRELESS
the wireless connection.
NOTE:
Connect.
DHCP S
ERVER
S
IP A
TART
address of the DHCP server to the projector connected to the wireless.
E
IP A
ND
DDRESS
the DHCP server to the projector connected to the wireless.
S
M
UBNET
G
—
ATEWAY
administrator if you configure it manually.
DNS—
Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S
—
Press
TORE
settings.
NOTE:
1. Use
Gateway, DNS, and Store.
2. Press the
DNS to set the value. (The selected option is highlighted in blue)
48
Using Your Projector
to reset network configuration.
—
Select and press
Default option is Connected. Select Disconnected to disable
It is recommended to use the default settings for Wireless
—
Allows you to enable DHCP server of the wireless.
—
Automatically or manually assigns the Start IP
DDRESS
—
Automatically or manually assigns the End IP address of
—
Configure the Subnet Mask of the wireless connection.
ASK
Check the Gateway address with your network/system
to save the changes made in wireless configuration
buttons to select IP Address, Subnet Mask,
and
button to enter IP Address, Subnet Mask, Gateway, or
button to store the settings.
to activate wireless settings. The
Hide quick links:
Advertisement
Table of Contents
