Dell 7700 FullHD User Manual page 33

6
Page up
7
Mute
8
Page down
9
Video mode
10 Blank screen
11 Up
12 Left
13 Menu
14 Volume up
15 Laser
16 Volume down
17 Keystone adjustment
18 Source
Press to move to the previous page.
NOTE:
The Mini USB cable must be connected
if you want to use the Page Up feature.
Press to mute or un-mute the projector speaker.
Press to move to the next page.
NOTE:
The Mini USB cable must be connected
if you want to use the Page Down feature.
The projector has preset configurations that are
optimized for displaying data (presentation slides)
or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show the
current display mode. Pressing the Video Mode
button again will switch between modes.
Press to hide/unhide the image.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to activate the OSD.
Press to increase the volume.
Point the remote control at the screen, press and
hold the laser button to activate the laser light.
WARNING: Do not look at the laser point when
it is active. Avoid directing the laser light on
your eyes.
Press to decrease the volume.
Press to adjust image distortion caused by tilting the
projector (+/-30 degrees).
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-Video
source.
Using Your Projector 33