Enable Wireless On The Projector - Dell 4220 User Manual

Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:
1 Install the optional wireless dongle. See "Installing the Optional Wireless
Dongle" on page 11.
2
Connect the power cable to the wall outlet and press the power button.
3 Press the Menu button on your projector control panel or remote control.
NOTE:
4
The wireless connection default is enable. See "Wireless Settings" on page 51.
5
Access the INPUT SOURCE menu, select Wireless/USB and then select
Wireless Display on the sub-menu. See "INPUT SOURCE WIRELESS/USB"
on page 39.
58 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
Use , , and buttons to navigate and to select.