2. Multimedia Firmware Upgrade Setup
Part A: Enable Wireless or LAN on the Projector
1. Connect the power cable and turn on the projector by pressing the power button.
2. If the LAN cable is used for firmware upgrade, follow these steps to re-active Wireless and
LAN feature when the Wireless and LAN is Disabled.
Step: Advanced Settings → LAN Settings → Wireless and LAN → Enabled. Go to Step 4.
3. If the Wireless Connection is used for firmware upgrade, follow these steps to re-active
Wireless and LAN feature when wireless connection is Disconnected.
Step: Advanced Settings → Wireless Settings → Wireless → Connected. Go to Step 5.
5