Dell 7700 FullHD User Manual page 45

P S
ROJECTOR ETTINGS
projector settings menu provides the following options:
A S
UTO OURCE
you press the Source button when the Auto Source mode is set to Off, you
can manually select the input signal. Select On to auto detect the available
input signals. If you press the Source button when the projector is on, it
automatically finds the next available input signal.
A K
UTO EYSTONE
caused by tilting the projector.
H
ORIZONTAL
keystone.
V K
ERTICAL
keystone.
P
ROJECTOR
upon how the projector is mounted.
•Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
•Rear Projection-Ceiling Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with
a ceiling-mounted projection.
•Front Projection-Desktop — This is the default option.
•Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
S —
PEAKER
speaker.
C C
LOSED APTION
closed caption menu. Select appropriate closed caption options: CC1,
CC2, CC3, and CC4.
—
Select and press
—
Select Off (the default) to lock the current input signal. If
—
Select On to automatically adjust image distortion
K —
Use
EYSTONE
—
Use
EYSTONE
M —
Allows you to select the projector mode, depending
ODE
Select On to enable the speaker. Select Off to the disable
—
Select On to enable close caption and activate the
to activate projector settings. The
and to adjust the image horizontal
and to adjust the image vertical
Using Your Projector 45