Enable Wireless On The Projector - Dell S320 User Manual

Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:
1 Install the optional wireless module kit (optional in S320). See "Installing the
Optional Wireless Module Kit" on page 14.
NOTE:
2 Connect the power cable to the wall outlet and press the power button.
3
Press the Menu button on your projector control panel or remote control.
NOTE:
4 Access the INPUT SOURCE menu, select Wireless/USB and then select
Wireless Display on the sub-menu. See "INPUT SOURCE
WIRELESS/USB" on page 52.
Downloaded From projector-manual.com DELL Manuals
Wireless module kit embedded for S320wi.
Use , , and buttons to navigate and
Using Your Projector
to select.
75