Advertisement
Press the Page Down button to step to next page.
Menu
Press the Menu button to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
Volume +/-
Press the Vol+ button to increase the volume, press the Vol- button to reduce the volume. (Enabled only when AV/PC button switches to A/V mode)
Horizontal Keystone-
+
Adjust image distortion caused by horizontal shifting of the projector orientation.
Auto Vertical keystone correction
Press the button to adjust the image distortion caused by tilting the projection AUTOMATICALLY.
Laser
Aim the remote control at the screen, and press and hold the Laser button to activate the laser light.
On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can be displayed with or without an input source present.
l
The OSD allows you to make image adjustments and change a variety of settings. If the source is a computer, the OSD allows changes to the
l
Computer Image tab. When using a video source, the OSD allows changes to the Video Image tab. The projector automatically detects the source.
When the OSD is on the screen, press
l
Example: All Images--> Computer Image--> Audio--> Management--> Language--> Factory Reset. To make a selection in a tab, press
keypad or "Menu" on remote controller.
Press
or
to make a selection and adjust the settings by pressing
l
When an item is selected, the color of the item will change to dark blue.
To exit the OSD, go to "Exit" tab and press
l
or
to navigate through the OSD tabs.
or
button on keypad or "Menu" on remote controller.
All Images Menu
on keypad or Left and Right button on the remote controller.
on
Advertisement
