Using The On-Screen Display - Dell 2400MP Owner's Manual

8
Video mode
9 Blank screen
10 LED light
11 Up button
12 Enter button
13
14 Menu
15 Volume
16 Keystone adjustment Press to adjust image distortion caused by tilting
17 Source
18 Auto adjust
19 Keystone adjustment Press to adjust image distortion caused by tilting

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main Menu, press
button on the control panel or the remote control to select a submenu.
In the submenu, press
color changes to dark gray. Use
22 Using Your Projector
The Dell 2400MP Micro-projector has preset
configurations that are optimized for displaying
data (PC Graphics) or video (movies, games,
etc.). Press Video Mode button to toggle between
PC mode, Movie mode, Game Mode, sRGB, or
CUSTOM mode (for user to setup and save
preferred settings). Pressing the Video Mode
button once will show the current display mode.
Pressing the Video Mode button again will switch
between modes.
Press to hide the image, press again to resume
display of the image.
LED indicator.
Press to select OSD items.
Press to confirm the selection.
Press to adjust the OSD setting.
Press to activate the OSD.
Press to decrease the volume.
the projector. (±40 degrees)
Press to switch between Analog RGB, Digital
RGB, Composite, Component-i, S-video, and
Analog YPbPr sources.
Press to synchronize the projector to the input
source. Auto adjust does not operate if the OSD
(On-Screen Display) is displayed.
the projector. (±40 degrees)
or to navigate through the tabs. Press Enter
or to make a selection. When an item is selected, the
or on the control panel or the remote