Advertisement
Directional Keys
Use
or
to select OSD items, use "left" and "right" button to make adjustments.
Hide
Press Hide button to hide the image, press again to resume display of the image.
Video Mode
The Dell 2100MP Microprojector has preset configurations that are optimized for displaying data (PC Graphics) or video (movies, games, etc.). Press Video
Mode button to toggle between PC mode, Movie mode, or User mode (for user to setup and save preferred settings). Pressing the Video Mode button
once will show the current display mode. Pressing the Video Mode button again will switch between modes.
Previous Page
Press the Previous Page button to page up.
Next Page
Press the Next Page button to page down.
Menu
Press the Menu button to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
Zoom In/Out
Press the In button to digitally magnify an image up to 32 times on the screen. Press the Out button to reduce the zoomed image.
Freeze
Press the Freeze button to temporarily stop motion video. Press the button again to resume.
Keystone
Adjusts image distortion caused by tilting the projector. ( ± 16 degrees)
On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can only be displayed when an input source is present.
l
The OSD allows you to make image adjustments and change a variety of settings. If the source is a computer, the OSD allows changes to the
l
Computer Image tab. When using a video source, the OSD allows changes to the Video Image tab. The projector automatically detects the source.
When the OSD is on the screen, press
l
Example: All Images--> Computer Image--> Management--> Language--> Factory Reset. To make a selection in a tab, press
"Menu" on remote controller.
Press
l
When an item is selected, the color of the item changes from light blue to dark blue.
To exit the OSD, go to "Exit" tab and press
l
Downloaded From projector-manual.com DELL Manuals
or
to navigate through the OSD tabs.
or
to make a selection and adjust the settings by pressing
button on keypad or "Menu" on remote controller.
or
on keypad or Left and Right button on the remote controller.
All Images Menu
on keypad or
Advertisement
