Advertisement
Back to Contents Page
Troubleshooting: Dell™ 4100MP Projector User's Guide
No image appears on the screen
Partial, scrolling, or incorrectly displayed image
The screen does not display your presentation
Image is unstable or flickering
Image has vertical flickering bar
Image color is not correct
Image is out of focus
The image is stretched when displaying 16:9 DVD
Image is reversed
Lamp is burned out or makes a popping sound
Self-diagnostic for video
The remote control is not operating smoothly or operating in very limited range
If you experience problems with your projector, see the following troubleshooting tips. If the problem persists,
No image appears on the screen
Ensure that the lens cap is removed and the projector turned on.
l
Ensure the external graphics port of the portable computer is enabled. If you are using a Dell portable computer, press
l
. For other computers, consult your owner's manual.
Ensure that all the cables are securely connected as described in
l
Ensure that the pins of the connectors are not bent or broken.
l
Ensure that the lamp is securely installed (see
l
Run "Self-diagnostic test" (see "
l
that the colors of the test pattern are correct.
Partial, scrolling, or incorrectly displayed image
Press the Auto Adjust button on the
l
If you are using a Dell portable computer (for other computers consult your owner's manual):
l
1. Set the resolution of the computer to XGA (1024 x 768):
1a) Right click on the unused portion of your Windows desktop-» Properties-» Settings tab.
1b) Verify the "Screen area" slide bar is set to 1024x 768 pixels for the external monitor port.
2. Press
If you experience difficulty in changing resolutions or your monitor freezes, restart all the equipment and the projector.
l
The screen does not display your presentation
If you are using a portable computer, press
l
Image is unstable or flickering
Adjust the tracking in the OSD Computer Image tab.
l
Image has vertical flickering bar
Adjust the frequency in the OSD Computer Image tab.
l
Image color is not correct
"Changing the
Self-diagnostic for
video") for preliminary diagnostic on projection problem for video. Ensure
remote control
or the
.
.
contact
"Connecting the
Projector."
Lamp").
control
panel.
Dell.
Advertisement
