Using The On-Screen Display - Dell M209X User Manual

8
Page down
9
Video mode
10 Blank screen
11 Up
12 Left
13 Menu
14 Volume up
15 Laser
16 Volume down
17 Keystone adjustment Press to adjust image distortion caused by tilting
18 Source
19 Auto adjust
20 Keystone adjustment Press to adjust image distortion caused by tilting

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main Menu, press
button on the control panel or the remote control to select a submenu.
In the submenu, press
20 Using Your Projector
Downloaded from ProjectorsManual.com Manuals
Press to move to next page.
The Dell M209X Micro-projector has preset
configurations that are optimized for displaying
data (PC Graphics) or video (movies, games,
etc.). Press the Video Mode button to toggle
between PC mode, Movie mode, Game Mode,
sRGB, or CUSTOM mode (for user to setup and
save preferred settings). Pressing the Video Mode
button once will show the current display mode.
Pressing the Video Mode button again will switch
between modes.
Press to hide/unhide the image.
Press to select OSD items.
Press to adjust the OSD setting.
Press to activate the OSD.
Press to increase the volume.
Point the remote control at the screen, press and
hold the laser button to activate the laser light.
Press to decrease the volume.
the projector. (+40/-35 degrees)
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-
video sources.
Press to synchronize the projector with the input
source. Auto adjust does not operate if the OSD
is displayed.
the projector. (+40/-35 degrees)
to navigate through the tabs. Press the Enter
or
or to make a selection. When an item is selected,