Printing The Network Configuration Report - Brother HL-S7000DN Network User's Manual
Multi-protocol on-board ethernet print server and wireless print server
Hide thumbs
Also See for HL-S7000DN:
- Service manual (460 pages) ,
- User manual (161 pages) ,
- Quick setup manual (36 pages)
Table of Contents
Advertisement
Control panel setup
Printing the Network Configuration Report
Note
Node name: The Node name appears on the Network Configuration Report. The default node name is
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network. ("xxxxxxxxxxxx" is
the last 6 figures of your machine's MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Print NetSetting.
Press OK.
Note
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.
4
4
37
Advertisement
Table of Contents
