Brother HL-S7000DN Network User's Manual page 32

Multi-protocol on-board ethernet print server and wireless print server

Hide thumbs Also See for HL-S7000DN:

Table of Contents

Configuring your machine for a wireless network

Choose your network that you want to connect to, and then click Next.

Click Close.

If your wireless device is connected successfully, the display shows Connected.

The machine will print your machine's wireless status report. If the connection failed, check the error

code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.

(Windows

)

You have completed the wireless network setup. If you would like to continue installing the

printer driver, please choose Install Printer Driver from the CD-ROM menu.

(Macintosh)

You have completed the wireless network setup. If you would like to continue installing the

printer driver, please choose Start Here OSX from the CD-ROM menu.

Note

The setup method varies according to your operating environment. If you are not able to connect your

wireless device successfully, see the instructions supplied with your WLAN access point/router and your

operating system.

Table of Contents