Brother HL-S7000DN Network User's Manual page 85

Troubleshooting
Brother machine cannot print over the network.
Brother machine is not found on the network even after the successful installation. (continued)
Question
Is your Brother machine
assigned with an available
IP address?
(continued)
Interface Solution
wired/
®
1 (Windows
wireless
Click the Start button, All Programs, Accessories and
Windows Explorer, and then My Computer.
(Windows Vista
Click the
2 Double-click Local Disk (C:), Program Files or Program Files (x86)
for 64-bit OS users, Browny02, Brother, BrotherNetTool.exe to run the
program.
Note
If the User Account Control screen appears,
(Windows Vista
®
(Windows
(Windows Server
3 Follow the on-screen instructions.
4 Check the diagnosis by printing the Network Configuration Report. See
Printing the Network Configuration Report uu page 37.
Note
The Network Connection Repair Tool will start automatically if you check
the Enable Connection Repair Tool box using Status Monitor.
Right-click on the Status Monitor screen, click Options, Details and then
click the Diagnostic tab. This is not recommended when your network
administrator has set the IP address to static, since it will automatically
change the IP address.
If the correct IP address and the Subnet mask are still not assigned even
after using the Network Connection Repair Tool, ask the network
administrator for this information, or visit the Brother Solutions Center at
http://solutions.brother.com/.
®
XP, Windows Server 2003/2008)
® ®
/Windows 7)
button and Computer.
®
) Click Continue.
7) Click Yes.
®
2008) Type password and then click OK.
7
79