How To Configure The Sntp Protocol Using Web Based Management - Brother HL-S7000DN Network User's Manual

Web Based Management
How to configure the SNTP protocol using Web Based
Management
SNTP is the protocol used to synchronize the time used by the machine for authentication with the SNTP time
server.
a
Click Network, and then click Protocol.
b
Select the SNTP check box to activate the setting.
c
Click Advanced Setting.
 Status
Displays whether the SNTP server settings are enabled or disabled.
 SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
 Primary SNTP Server Address, Secondary SNTP Server Address
Enter the server address (up to 64 characters).
The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the
Primary server is unavailable, the machine will contact the Secondary SNTP server. If you have a
primary SNTP server, but no secondary SNTP server, simply leave this field blank.
 Primary SNTP Server Port, Secondary SNTP Server Port
Enter the Port number (1 to 65535).
The Secondary SNTP server port is used as a backup to the Primary SNTP server port. If the Primary
port is unavailable, the machine will contact the Secondary SNTP port. If you have a primary SNTP
port, but no secondary SNTP port, simply leave this field blank.
 Synchronization Interval
Enter the number of hour(s) between server synchronization attempts (1 to 168 hours).
Synchronization Status

You can confirm the latest synchronization status.
d
Click Submit to apply the settings.
5
5
48