Sending An E-Mail Securely Using Ssl/Tls - Brother HL-S7000DN Network User's Manual

Multi-protocol on-board ethernet print server and wireless print server
Hide thumbs Also See for HL-S7000DN:
Table of Contents

Advertisement

Security features
Note
• You can change the SMTP port number using Web Based Management. This is useful if your ISP (Internet
Service Provider) implements the "Outbound Port 25 Blocking (OP25B)" service.
• If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
• If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method if needed.

Sending an E-mail securely using SSL/TLS

This machine supports SSL/TLS methods to send an E-mail via an E-mail server that requires secure
SSL/TLS communication. To send E-mail via an E-mail server that is using SSL/TLS communication, you
must configure SMTP over SSL/TLS or POP3 over SSL/TLS correctly.
Verifying Server Certificate
If you choose SSL or TLS for SMTP over SSL/TLS or POP3 over SSL/TLS, the
Verify Server Certificate check box will be automatically checked to verify the Server Certificate.
• Before you verify the Server Certificate, you must import the CA certificate that has been issued by the
CA that signed the Server Certificate. Contact your network administrator or your ISP (Internet Service
Provider) to confirm whether a CA certificate import is necessary. For importing the certificate, see
Import and export a CA certificate uu page 75.
• If you do not need to verify the Server Certificate, uncheck Verify Server Certificate.
Port Number
If you choose SSL or TLS, the SMTP Port or POP3 Port value will be changed to match the protocol. If
you want to change the port number manually, enter the port number after you choose
SMTP over SSL/TLS or POP3 over SSL/TLS.
You must configure the POP3/SMTP communication method to match the E-mail server. For details of the
E-mail server settings, contact your network administrator or ISP (Internet Service Provider).
In most cases, the secured webmail services require the following settings:
(SMTP)
SMTP Port: 587
SMTP Server Authentication Method: SMTP-AUTH
SMTP over SSL/TLS: TLS
(POP3)
POP3 Port: 995
POP3 over SSL/TLS: SSL
6
6
61

Advertisement

Table of Contents
loading

Table of Contents