Ricoh Aficio SP C311N Information page 5

Handling the Machine
R WARNING:
• When replacing the Transfer Unit, turn the main power switch off and
wait at least 30 minutes before proceeding with the replacement.
• When replacing the Fusing Unit, turn the main power switch off and
wait at least 30 minutes before proceeding with the replacement.
• Wait for 30 minutes or more after disconnecting the power plug before
removing the transfer unit.
R CAUTION:
• Before moving the machine, unplug the power cord from the wall outlet. If
the cord is unplugged abruptly, it could become damaged. Damaged plugs
or cords can cause an electrical or fire hazard.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
• Do not connect the Ethernet port of the machine to a network that may sup-
ply excess voltage, such as a telephone line. Doing so may result in fire or
electric shock.
• The printer weighs approximately 28 kg (61.7 lb.). When moving the printer,
use the inset grips on both sides, and lift slowly in pairs. The printer will
break or cause injury if dropped.
• When moving the printer after use, do not take out any of the toners, nor the
waste toner bottle to prevent toner spill inside the machine.
• When moving the printer, use the inset grips on both sides. The printer will
break or cause injury if dropped.
• Be careful not to trap your fingers when opening or closing the top cover.
5