Replacing Consumables
Replacing the Maintenance Kit
R WARNING:
• When replacing the Transfer Unit, turn the main power switch off and
wait at least 30 minutes before proceeding with the replacement.
• When replacing the Fusing Unit, turn the main power switch off and
wait at least 30 minutes before proceeding with the replacement.
R CAUTION:
• The inside of this printer becomes very hot. Do not touch parts labelled "v"
(indicating a hot surface).
❖ When to replace the maintenance kit
If the Alert indicator on the control panel lights up and the following message
appears on the display, replace the fusing unit and the transcription roller:
"
Replace Fusing Unit
A
Pull Front Cover Open Lever, and then open the front cover with both
hands carefully.
6
B
Hold the levers on both sides of the fusing unit and carefully pull it out.
Place the old fusing unit on a flat surface.
92
"
ASI025S
ASI043S