Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket; Tv Components - Dynex DX-15E220A12 User Manual

4
DX-15E220A12
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Secure the stand to the stand column on the TV with
the two screws (B3, 12 mm) provided.

Installing a wall-mount bracket

Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
To attach your TV to a wall-mount bracket:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.

Installing the stand or wall-mount bracket

2
Remove the four screws that secure the stand/stand
column assembly to the TV (A), then remove the
assembly (B).
3
Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws
• Composite cable
• Quick Setup Guide
2.95 in. (75mm)
SERVICE
PC / DVI DIGITAL
PORT HDMI 2 HDMI 1 / DVI VGA AUDIO IN OUTPUT
Wall mount bracket holes