Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Dynex DX-24L230A12 User Manual

4
DX-24L230A12/DX-32L220A12/DX-46L261A12
The appearance of the product in this User Guide
may differ from your actual product, and is for
explanatory purposes only.
Installing the stand or
wall-mount bracket
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Align the screw holes on the stand with the holes on
the bottom edge of the TV, then secure the stand
with the screws provided (two M5 x 8 mm screws for
the 24" TV, three M5 x 8 mm screws for the 32" TV,
and four M5 x 8 mm screws for the 46" TV).
You must pay attention to the direction of the stand.
The wide portion of the stand should go towards the
front of the TV.
Stand

Installing a wall-mount bracket

Locators
Locating grooves
M5 x 8 mm screws

Installing the stand or wall-mount bracket

This apparatus is intended to be supported by a UL
Listed wall mount bracket.
To attach your TV to a wall-mount bracket:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Remove the screws that secure the base to the
stand, then remove the base.
3
Remove the screws what secure the stand column to
the TV, then remove the column.
4
Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
DX-24L230A12 (24-inch TV)
3.94 in. (100 mm)
Remove the screws
Wall mount brackets