The reset confirmation message appears.
The gyrosensor's learning function memory is reset (see, "Positioning Technology" on page
129 for details of the learning function). This may take a little time; remain stationary until the
location status display appears once again.
• See "Selecting a calibration memory" on page 111 for more information about use of memories.
CAUTION
• Have someone drive with you to watch the display.
• Make sure you have chosen a level stretch of road, and drive straight ahead.
• If
g
(black) is still displayed, you must go through the calibration process again. Before doing so,
check that a vehicle speed pulse is being received by checking the "LOCATION STATUS" display
(as described on page 108).
• If for any reason you have to stop or avoid an obstacle while driving forward, repeat the calibration
process from the beginning.