Navigation Commander Batteries; The Main Unit; The Navigation Commander - Pioneer AVIC-505 Owner's Manual

Navigation commander batteries

The Navigation commander requires two batteries (supplied). Take note of the following
precautions when inserting or changing the batteries.
CAUTION
• Take care to insert the batteries in the correct orientation as shown by the + and –
marks in the diagram.
• Do not mix new batteries with old.
• Do not mix different types of batteries. Even batteries of the same size may have
different voltages.
• Remove the batteries from the Navigation commander if it will be out of use for a
long period.
• If a battery leaks, completely clean any liquid or deposits from the battery
compartment before inserting new batteries.
• The supplied batteries cannot be recharged.
• We recommend using alkaline batteries as replacements.

The main unit

Reset button
• CD-ROM slot
To open the cover and eject the CD-ROM, push the cover down at the "EJECT" mark.
• Reset button
In the event of a major malfunction of the system, use a ball-point pen or similar pointed object
to reset it using this recessed button (see "Resetting the System" on page 140).
Supplied alkaline batteries
(UM-4, LR03 1.5 V)
CD-ROM slot