Pioneer AVIC-505 Owner's Manual page 127

If accepted, the command is repeated on the display.
• If the command displayed is not the one you gave, press the
until the desired command is shown (see "Using Voice Operation" above).
After all the countdown lamps have changed colour, information about the nearest point of
interest in that category is displayed. (If you say <Hotel> for example, the screen shown above
will be displayed.) You also hear the information: "There is one, in ** m (the distance from
your current location to the point of interest in question). Do you want to stop there?"
The options available here are as follows.
• YES
The system sets a route to the point of interest while under guidance.
• NO
The category is ticked and icons indicating the location of points of interest in this category
are overlaid on the map.
• NEXT
Information is given about the second-nearest point of interest in the chosen category.
• PREVIOUS
Provides information about the previous point of interest once again.
The information provided about a point of interest is as follows.
• Name of point of interest
• Distance to point of interest
• Direction to point of interest from your current location
• If there is no point of interest in the selected category in your present vici-nity, the category is simply
overlaid on the map.
C (NEXT OPTION) button repeatedly