Volume Control; Demonstration - Pioneer AVIC-505 Owner's Manual

Volume control

This allows the volume to be set if you are using a display without its own volume control. This
setting is provided for future functionality.
The volume control display appears, showing the current volume setting.
If you have a display with its own volume control, two volume controls are available. In this
case, set the "VOLUME CONTROL" to level 9 (the maximum) and use the volume control on
the display to obtain the volume you desire.

Demonstration

This setting allows the system to be demonstrated. If "DEMONSTRATION" is turned on, the
drive to your destination will be simulated as soon as a route has been set. (This is particularly
useful for dealers, who can set up demonstrations to run in their stores; it should always be set
to "OFF" in normal use.)
• ON (REPEATEDLY):
• ON (ONCE):
• OFF:
Simulates the drive repeatedly after a route has been set.
Simulates the drive only once after a route has been set, returning
to display the vehicle position in normal Guidance mode when the
destination is reached.
The standard setting. No demonstration is displayed.