Ricoh Aficio SP C730DN User Manual page 66

3. Troubleshooting
File System Full.
The PDF file does not print out because the capacity of the file system is full.
Delete all unnecessary files from the hard disk, or decrease the file size sent to the printer.
Function use denied.
The print job was cancelled because of one of the following:
• The user does not have privileges to print.
• No privileges to print are assigned to the entered user name or user code, or
• A wrong password was specified for the user name.
Enter the user name or user code with privileges to print, or enter the correct password for the user
name.
HDD is full.
The hard disk became full while printing a Sample Print, Locked Print, Hold Print, or Stored Print file.
Delete unneeded files stored in the printer. Reduce the data size of the Sample Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the PostScript 3 printer driver, the hard disk capacity for fonts and forms has been
exceeded. Delete unneeded forms or fonts registered in the printer.
HDD not installed.
The printer received a stored job file but no hard disk is installed. Install a hard disk.
I/O buffer overflow.
An input buffer overflow occurred.
• Select [Font Priority] for [Memory Usage] in [System].
• In [I/O Buffer] under the [Host Interface] menu, set the maximum buffer size to a larger value.
• Reduce the number of files being sent to the printer.
Insufficient Memory.
A memory allocation error occurred.
• PCL 5/PostScript 3
Select a lower resolution on the printer driver. For details about how to change the resolution
setting, see the printer driver Help.
• PCL 6
Select a lower resolution on the printer driver. For details about how to change the resolution
setting, see the printer driver Help. On the printer driver's [Detailed Settings] tab, click [Print
Quality] in "Menu:", and then select [Raster] in the "Vector/Raster:" list. In some cases, it will take a
long time to complete a print job.
64