Function Description - ViewSonic VX1933W Service Manual

5.5 Function description:

Input Signal Notice Actions
1. The Input Signal Notice OSD appears 1 second when power turns on or change
input signal.
2. The Input Signal Notice OSD position is on the right-top side of image.
3. The OSD message as below,
Resolution Notice Actions
7. Resolution Notice OSD should show on screen after changing to non-native mode
for 30 sec.
8. Key button definition:
[1]: Turn off the OSD message.
[2]: Turn off the OSD message and disable Resolution Notice function
9. The OSD should disappear after 10 sec or by pushing button [1] or [2]
10. After the OSD turns off, it will not show on again before next timing change, input change or power
off.
11. Resolution Notice function should be disabled when push button [2] under Resolution Notice OSD
12. The "1366x768" will be replaced by actual panel resolution.
0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to
buffer for further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
ViewSonic Corporation 55 CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN