ViewSonic VX1933W Service Manual page 23

1. Show on existing input port by red
color
2. Default = 6500K
3. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected color
setting
[Up]: Move up the slider
[Dn]: Move down the slider
4. Under DCR mode (Dynamic Contrast
= On), SRGB shall be disabled with
gray color. And it should not be
selected.
ViewSonic Corporation
Change Color setting to 6500K
5000K
Change Color setting to 5000K
User Color
Jump to Red OSD directly
20
Red
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Green OSD
[Up]: Increase the OSD value setting
[Dn]: decrease the OSD value setting
Green
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Blue OSD
[Up]: Increase the OSD value setting
[Dn]: decrease the OSD value setting
Blue
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Red OSD
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN