ViewSonic VX1933W Service Manual page 19

Signal + [2] + [ ]
Remark : All the short cuts function are only available while OSD off
3.3 MAIN MENU OSD TABLE
Main Menu
Level 1
Auto Image Adjust
1. Background = blanking
2. The message OSD position is at
the center.
3. After auto tune, OSD shall be off
4. Only for analog mode 4. Only for
analog mode
Contrast/Brightness
ViewSonic Corporation
When switch to DDC/CI
When switch to DDC/2B
Default = DDC/CI
Factory Mode
1. Key button definition:
[1]: OSD off
[2]: Execute the selected function
[Up]: Rolling up the slider
(When push the button on the top position, the slider shall
go down to the bottom item)
[Dn]: Rolling down the slider
(When push the button on the bottom position, the slider
shall go down to the top item)
2. Under sRGB or DCR mode, the Contrast/Brightness shall be
disabled with gray color. And it should not be selected.
Level 2
Contrast
16 CONFIDENTIAL – DO NOT COPY
Level 3
VX2433wm-1
VX2433wm-CN