ViewSonic VX1933W Service Manual page 22

Audio Adjust
1. The selected icon in Mute will be
highlighted
2. Key button definition:
[1]: Back to previous OSD status
[2]: Change to Volume or Mute the
selected audio setting
[Up]: Increase the volume settingMove
up the slider or Toggle audio to Mute
or Audible icon
[Dn]: Decrease the volume
settingMove down the slider or Toggle
audio to Mute or Audible icon
3. No signal, no output
4. This function must memorize its
status after DC/AC Off to On
Color Adjust
ViewSonic Corporation
1. Target video input port = HDMI
AV
2. If signal detected from target
port, change to target port.
3. If no signal detected from target
port, keep existing input port.
Step 3: Show on Input Message
OSD at the right-top corner of
screen for 1 second.
HDMI
Volume
1. Adjust range = 0 to 100
2. Default = 50
3. Key button definition:
[1]: Back to Audio Adjust OSD
[Up]: Increase the volume setting
[Dn]: Decrease the volume setting
Mute
1. Default = Off
2. Key button definition:
[1]: Back to Audio Adjust OSD
[2]: Switch to Volume adjustment
[Up],[Dn]: Toggle audio to Mute or
Audible iconToggle audio to Mute
or Audible icon
3. When Mute function is selected, any
change in Volume will disable Mute and
toggle to Audible icon.
sRGB
Change Color setting to sRGB
9300K
Change Color setting to 9300K
7500K
Change Color setting to 7500K
6500K
19
AV
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN